Most likely White Oak; alternatives include Red Oak or chestnut oak. — Quercus alba (probable)

Most likely White Oak; alternatives include Red Oak or chestnut oak.

Quercus alba (probable) · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America, especially the Appalachian, Midwest, and southeastern United States.
Hardness
1,360 lbf Janka — Hard
Durability
Durable; heartwood has good resistance to decay and weathering, with moderate insect resistance.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, coarse grain with prominent earlywood pores; the face appears flat-sawn with subtle cathedral patterning and a natural radial crack.

Color & Appearance

Fresh heartwood is light tan to medium brown, with pale sapwood; exposure typically deepens it toward warm golden brown and reduces contrast.

Hardness (Janka)

1,360 lbf Janka — Hard

Durability & Decay Resistance

Durable; heartwood has good resistance to decay and weathering, with moderate insect resistance.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$12 per board foot for ordinary kiln-dried stock; premium clear or wide boards may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from the photograph; it appears freshly cut or only lightly weathered, with no convincing antique patina.

Common Uses

Furniture, flooring, cabinetry, millwork, barrels, boat components, veneer, and general construction.

Geographic Origin

Eastern and central North America, especially the Appalachian, Midwest, and southeastern United States.

Workability

Machines and sands well, though coarse pores and interlocked areas can cause tear-out; predrilling is advisable, and tannins may darken around iron fasteners.

Finish Recommendations

Sand progressively, fill pores if a smooth surface is desired, then use oil, shellac, lacquer, or polyurethane; water-based finishes may raise the grain.

Notable Features

Visible large pores, strong growth-ring contrast, substantial weight, and characteristic oak ray fleck when quarter-sawn.

Learn more about Most likely White Oak; alternatives include Red Oak or chestnut oak. in the Wood Encyclopedia
Identified September 2, 2026