Most likely oak, probably White Oak; alternatives include Red Oak or another ring-porous oak.
Quercus alba (probable); Quercus rubra is an alternative. · Hardwood (angiosperm/deciduous).
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm/deciduous).
- Origin
- Eastern and central North America, especially the eastern United States and southeastern Canada.
- Hardness
- White Oak: approximately 1,360 lbf, classified Hard; Red Oak: approximately 1,290 lbf, also Hard.
- Durability
- White Oak is Durable, with good decay and weather resistance; Red Oak is Moderately Durable and generally less rot-resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, coarse, strongly ring-porous grain with prominent elongated earlywood pores; the surface appears weathered or aggressively wire-brushed, obscuring figure and cut orientation.
Color & Appearance
Weathered gray-tan to pale brown with darker brown streaks in pores and recesses; fresh oak would be pale tan to medium brown and typically darkens modestly with age.
Hardness (Janka)
White Oak: approximately 1,360 lbf, classified Hard; Red Oak: approximately 1,290 lbf, also Hard.
Durability & Decay Resistance
White Oak is Durable, with good decay and weather resistance; Red Oak is Moderately Durable and generally less rot-resistant.
Value & Age
Approximately $6–$14 per board foot for clear, kiln-dried white oak; heavily weathered or lower-grade stock may be less.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The image cannot establish chronological age; gray oxidation and abrasion indicate weathering or reclaimed-looking surface, not necessarily old wood.
Common Uses
Furniture, flooring, cabinetry, barrels, trim, veneer, boatbuilding, and general construction.
Geographic Origin
Eastern and central North America, especially the eastern United States and southeastern Canada.
Workability
Machines and glues well, though coarse grain can tear out during planing and open pores require filling for a smooth finish; predrilling is advisable.
Finish Recommendations
Remove loose fibers, sand progressively, and use penetrating oil, hardwax oil, lacquer, or polyurethane; pore filling gives a flatter surface.
Notable Features
Distinctive open pores, strong tannin content, high strength, and pronounced texture when brushed or weathered.
