Most likely weathered white oak flooring; alternatives include red oak or reclaimed ash.
Quercus alba (likely); Quercus rubra or Fraxinus spp. are alternatives. · Hardwood; appears reclaimed or deliberately distressed flooring.
AI-generated identification · may be incorrect- Type
- Hardwood; appears reclaimed or deliberately distressed flooring.
- Origin
- White oak is native to eastern and central North America; commonly milled throughout the eastern United States.
- Hardness
- White oak: about 1,360 lbf Janka—Hard. Red oak is about 1,290 lbf; ash about 1,320 lbf.
- Durability
- White oak: Durable; good decay resistance and moderate insect resistance, though surface weathering is evident.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, with broad cathedral/flat-sawn grain, open-pore texture, and irregular dark mineral or wear streaks; no clear decorative figure.
Color & Appearance
Muted gray-brown/taupe surface with darker grain and substantial patina; likely originally pale tan to light brown, darkened and desaturated by oxidation, finish, and wear.
Hardness (Janka)
White oak: about 1,360 lbf Janka—Hard. Red oak is about 1,290 lbf; ash about 1,320 lbf.
Durability & Decay Resistance
White oak: Durable; good decay resistance and moderate insect resistance, though surface weathering is evident.
Value & Age
Approximately $5–$12 per board foot for common reclaimed or distressed oak; premium figured stock costs more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The visible gray patina and wear suggest years to decades of service, but the wood’s biological age cannot be determined from this image.
Common Uses
Flooring, furniture, cabinetry, interior trim, barrels, veneer, and general construction.
Geographic Origin
White oak is native to eastern and central North America; commonly milled throughout the eastern United States.
Workability
Generally machines, sands, glues, and finishes well, but open pores and occasional grain reversal can cause tear-out; predrilling is useful.
Finish Recommendations
Clean and lightly sand, then use penetrating oil, hardwax oil, or water-/oil-based polyurethane; test first because reclaimed surfaces absorb unevenly.
Notable Features
Open pores, prominent cathedral grain, strong wear variation, and likely tannin-rich oak character.