Likely smoked or weathered oak veneer over engineered fiberboard; exact oak species uncertain (possibly White Oak or Red Oak).
Quercus spp.; substrate likely wood-fiber composite · Engineered, veneered hardwood panel
AI-generated identification · may be incorrect- Type
- Engineered, veneered hardwood panel
- Origin
- Oak veneer could originate from eastern North America or Europe; panel origin cannot be determined visually.
- Hardness
- Oak veneer: about 1,290–1,360 lbf, Hard; the composite core has no directly comparable Janka rating.
- Durability
- Slightly Durable as a panel; veneer may resist wear, but exposed fiberboard core is vulnerable to moisture and decay.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, elongated cathedral/linear grain with narrow pores; thin rotary- or flat-sliced veneer over a uniform dark core.
Color & Appearance
Gray-brown to taupe surface with subdued luster and darker streaking, consistent with stain, smoke, or weathering; substrate is dark brown.
Hardness (Janka)
Oak veneer: about 1,290–1,360 lbf, Hard; the composite core has no directly comparable Janka rating.
Durability & Decay Resistance
Slightly Durable as a panel; veneer may resist wear, but exposed fiberboard core is vulnerable to moisture and decay.
Value & Age
Approximately $3–10 per square foot for comparable decorative veneered panel, depending on thickness and finish.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Likely modern manufactured material; apparent gray coloration reflects finish or exposure rather than reliably indicating age.
Common Uses
Furniture panels, shelving, cabinetry, doors, and decorative interior surfaces.
Geographic Origin
Oak veneer could originate from eastern North America or Europe; panel origin cannot be determined visually.
Workability
Cuts and sands readily, but veneer can chip or sand through; fiberboard produces fine dust and has weaker screw-holding than solid wood.
Finish Recommendations
Seal exposed edges, then use waterborne polyurethane, lacquer, or hardwax oil after light sanding; avoid aggressive sanding through the veneer.
Notable Features
Visible end grain shows a fine, homogeneous composite core rather than solid oak; the face has strong linear oak-like figure.