Most likely quarter-sawn oak, probably White Oak; alternatives include Red Oak or reclaimed oak affected by staining/finish.
Quercus alba (probable); Quercus rubra is the main alternative. · Hardwood; likely reclaimed or antique solid oak.
AI-generated identification · may be incorrect- Type
- Hardwood; likely reclaimed or antique solid oak.
- Origin
- Eastern and central North America; commonly grown in the eastern United States and southeastern Canada.
- Hardness
- White Oak: about 1,360 lbf, Hard; Red Oak: about 1,290 lbf, Hard.
- Durability
- Durable, especially White Oak; good resistance to decay and insects when heartwood is present, though holes indicate prior insect activity or damage.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent quarter-sawn, mostly straight grain with strong dark medullary-ray fleck and elongated grain streaking; no clear cathedral figure.
Color & Appearance
Honey to medium brown with dark oxidized streaks and pronounced contrast from age, finish, or staining; quartered oak often develops warm amber patina.
Hardness (Janka)
White Oak: about 1,360 lbf, Hard; Red Oak: about 1,290 lbf, Hard.
Durability & Decay Resistance
Durable, especially White Oak; good resistance to decay and insects when heartwood is present, though holes indicate prior insect activity or damage.
Value & Age
Approximately $6–$15 per board foot for ordinary surfaced oak; figured or high-grade reclaimed material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Visual patina suggests decades of exposure or an older finished component, but age cannot be reliably determined from this image.
Common Uses
Furniture, flooring, cabinetry, paneling, doors, barrels, veneer, and boatbuilding.
Geographic Origin
Eastern and central North America; commonly grown in the eastern United States and southeastern Canada.
Workability
Generally machines, sands, glues, and finishes well, though high density can blunt tools and quartered grain may cause localized tearout.
Finish Recommendations
Clean and lightly abrade; use shellac, lacquer, oil, or polyurethane after testing for compatibility and stain uniformity. Fill holes if a smooth surface is desired.
Notable Features
Visible dark holes are consistent with old beetle damage or nail/fastener holes; ray fleck is characteristic of quarter-sawn oak.