Most likely Eastern White Pine; alternatives include lodgepole pine or other light-colored construction pine.
Pinus strobus · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Eastern North America, especially the northeastern United States and southeastern Canada.
- Hardness
- Janka about 380 lbf — Very Soft.
- Durability
- Slightly Durable; limited natural resistance to rot, insects, and prolonged weather exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-grained, flat-sawn boards with prominent oval knots and occasional resin pockets; no special figure visible.
Color & Appearance
Very pale cream to yellow-white heartwood and lighter sapwood, with pinkish growth-ring bands. It develops a warmer honey-gold tone with light exposure.
Hardness (Janka)
Janka about 380 lbf — Very Soft.
Durability & Decay Resistance
Slightly Durable; limited natural resistance to rot, insects, and prolonged weather exposure.
Value & Age
Approximately $2–$5 per board foot for common clear-to-knotty stock, varying by region and grade.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The boards appear relatively new, likely kiln-dried commercial stock; visible patina or wear is minimal.
Common Uses
Interior trim, shelving, furniture, cabinetry, crates, construction lumber, carving, and painted projects.
Geographic Origin
Eastern North America, especially the northeastern United States and southeastern Canada.
Workability
Very easy to cut, plane, sand, glue, nail, and screw, though soft fibers dent easily and resin can affect blades or finishes.
Finish Recommendations
Sand carefully, seal knots with shellac-based primer, then use oil, lacquer, shellac, or polyurethane. Preconditioning helps reduce blotchy stain absorption.
Notable Features
Lightweight, warm tactile surface, conspicuous knots, and occasional resin scent; knots may loosen or bleed through coatings.