Most likely eucalyptus (alternative: black locust or another urban hardwood); species-level identification is unreliable from this image.
Likely Eucalyptus spp.; exact species undetermined. · Hardwood; likely an exotic/introduced landscape tree.
AI-generated identification · may be incorrect- Type
- Hardwood; likely an exotic/introduced landscape tree.
- Origin
- Eucalyptus is native mainly to Australia and nearby islands, but widely planted in warm regions, including California.
- Hardness
- Species-dependent; commonly about 1,100–2,000 lbf (Medium to Very Hard).
- Durability
- Variable, generally Moderately Durable to Durable; heartwood may resist decay better than sapwood, but species confirmation is essential.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Visible bark and freshly cut rounds show coarse, generally straight-to-irregular grain; no reliable figure or end-grain detail is visible.
Color & Appearance
Fresh cuts appear pale tan to yellow-brown with darker bark and possible reddish-brown heartwood; exposed wood will oxidize darker and gray outdoors.
Hardness (Janka)
Species-dependent; commonly about 1,100–2,000 lbf (Medium to Very Hard).
Durability & Decay Resistance
Variable, generally Moderately Durable to Durable; heartwood may resist decay better than sapwood, but species confirmation is essential.
Value & Age
Rough urban logs: often $0.50–$3 per board foot; sound, milled figured material may be substantially higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The tree appears mature, but the age of the cut wood cannot be estimated visually; the rounds look freshly cut with minimal patina.
Common Uses
Firewood, posts, flooring, furniture, turning, pulp, and occasionally structural or outdoor products.
Geographic Origin
Eucalyptus is native mainly to Australia and nearby islands, but widely planted in warm regions, including California.
Workability
Variable; dense eucalyptus can blunt tools, cause tear-out, move during drying, and check at ends. Sharp tooling, slow drying, and sealed end grain are advisable.
Finish Recommendations
For dry indoor work, use a penetrating oil, shellac, lacquer, or polyurethane after thorough drying and sanding; seal end grain to limit checking.
Notable Features
Often heavy, ring-porous to semi-ring-porous, and prone to internal stresses and checking; bark texture is not diagnostically sufficient.