Most likely quarter-sawn oak, probably White Oak; possible Red Oak or reclaimed oak.
Quercus alba (alternatives: Quercus rubra or another Quercus species) · Hardwood; apparently older, finished furniture or paneling stock.
AI-generated identification · may be incorrect- Type
- Hardwood; apparently older, finished furniture or paneling stock.
- Origin
- Eastern and central North America, especially the eastern United States.
- Hardness
- White Oak: approximately 1,360 lbf, Hard; Red Oak: approximately 1,290 lbf, Hard.
- Durability
- Moderately Durable to Durable; oak heartwood has useful decay resistance, though finish condition and construction determine actual weathering performance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, tight, closely spaced growth rings with visible quarter-sawn ray fleck and occasional knots; the long parallel lines suggest quarter-sawn oak veneer or boards.
Color & Appearance
Honey-amber to medium brown heartwood with darker oxidation and finish; lighter sapwood is limited. Glossy coating enhances chatoyance; likely darkened with age and exposure.
Hardness (Janka)
White Oak: approximately 1,360 lbf, Hard; Red Oak: approximately 1,290 lbf, Hard.
Durability & Decay Resistance
Moderately Durable to Durable; oak heartwood has useful decay resistance, though finish condition and construction determine actual weathering performance.
Value & Age
Approximately $6–$15 per board foot for clear new oak; figured or reclaimed furniture-grade material may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The wood itself cannot be dated visually; the worn finish and oxidation suggest an older finished piece, possibly several decades old.
Common Uses
Furniture, cabinets, flooring, architectural paneling, veneer, barrels, and interior trim.
Geographic Origin
Eastern and central North America, especially the eastern United States.
Workability
Machines and sands well, but quarter-sawn oak can cause localized tearout; tannins may darken around iron fasteners. Glues and finishes reliably after thorough cleaning.
Finish Recommendations
Clean gently, test compatibility, then use shellac, lacquer, or oil-based polyurethane; avoid aggressive sanding that could remove veneer or patina.
Notable Features
Prominent medullary-ray fleck is characteristic of quarter-sawn oak; open pores and strong growth-ring contrast are visible.
