Most likely White Oak; alternatives include Red Oak or reclaimed oak.
Quercus alba (likely); Quercus rubra possible. · Hardwood; likely domestic oak, possibly reclaimed.
AI-generated identification · may be incorrect- Type
- Hardwood; likely domestic oak, possibly reclaimed.
- Origin
- Eastern and central North America, especially the Midwest, Appalachians, and eastern forests.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard. Red Oak is about 1,290 lbf.
- Durability
- White Oak: Durable, with good rot resistance; Red Oak is moderately durable and less resistant to moisture exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-grained, flat-sawn appearance with subtle cathedral pattern; no distinctive figure visible.
Color & Appearance
Light tan to honey-brown with darker brown streaks and moderate natural luster. Oak typically deepens slightly toward golden brown with age and light.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard. Red Oak is about 1,290 lbf.
Durability & Decay Resistance
White Oak: Durable, with good rot resistance; Red Oak is moderately durable and less resistant to moisture exposure.
Value & Age
Approximately $5–$12 per board foot for ordinary kiln-dried clear oak; premium figured or wide stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The sample appears finished and lightly worn, but visible evidence is insufficient to estimate tree or object age reliably.
Common Uses
Furniture, flooring, cabinetry, paneling, barrels, interior trim, veneer, and general construction.
Geographic Origin
Eastern and central North America, especially the Midwest, Appalachians, and eastern forests.
Workability
Machines, sands, glues, and finishes well, though open pores and occasional grain reversal can cause tear-out. Pre-drilling is advisable for fasteners.
Finish Recommendations
Sand uniformly, fill pores if a glass-smooth surface is desired, then apply oil, lacquer, shellac, or polyurethane. Water-based finishes may emphasize grain contrast.
Notable Features
Prominent open pores, strong grain contrast, substantial weight, and good dimensional stability; White Oak is notably tighter-grained than Red Oak.
