Most likely maple plywood/veneer; alternatives include birch or poplar.
Acer spp., probably Acer saccharum or Acer rubrum; species cannot be confirmed from this image. · Hardwood; likely engineered veneer-faced plywood rather than solid lumber.
AI-generated identification · may be incorrect- Type
- Hardwood; likely engineered veneer-faced plywood rather than solid lumber.
- Origin
- North American hardwood forests, especially eastern Canada and the United States.
- Hardness
- Sugar maple: about 1,450 lbf, Hard; red maple: about 950 lbf, Medium.
- Durability
- Slightly durable; untreated maple has limited resistance to rot, insects, and weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, subdued grain with faint cathedral-like variation; no obvious figure. End grain is not visible.
Color & Appearance
Very pale gray-white to cream with low contrast and modest luster; likely altered by lighting, finish, or surface oxidation. Maple commonly warms slightly yellow with age.
Hardness (Janka)
Sugar maple: about 1,450 lbf, Hard; red maple: about 950 lbf, Medium.
Durability & Decay Resistance
Slightly durable; untreated maple has limited resistance to rot, insects, and weathering.
Value & Age
Approximately $3–$8 per board foot equivalent for clear maple; veneer plywood pricing varies by panel and grade.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from the photograph; the surface appears relatively clean and modern, without distinctive patina.
Common Uses
Cabinetry, furniture, interior panels, flooring, trim, and plywood veneer.
Geographic Origin
North American hardwood forests, especially eastern Canada and the United States.
Workability
Generally machines and sands well, though maple can burn, show machining marks, and develop tearout near irregular grain. Glues and fastens well with proper pilot holes.
Finish Recommendations
Use sanding sealer followed by clear lacquer, shellac, or polyurethane; water-based finishes preserve its pale appearance. Test for blotching on solid maple.
Notable Features
Fine, uniform texture and understated grain; no diagnostic scent or figure is visible.
