Most likely White Oak; alternatives include European Oak or Ash. — Quercus alba (likely)

Most likely White Oak; alternatives include European Oak or Ash.

Quercus alba (likely) · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America, especially the eastern United States.
Hardness
1,360 lbf Janka — Hard.
Durability
Durable; heartwood has good natural resistance to decay and insects, while sapwood is less resistant. Not enough information to assess weathering condition.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, open grain with strong cathedral/curved figure, consistent with flat-sawn or plain-sawn stock; no clear quarter-sawn ray fleck is visible.

Color & Appearance

Pale beige to light tan heartwood and sapwood with subtle gray-brown variation; moderate luster. It typically warms slightly amber with age and light.

Hardness (Janka)

1,360 lbf Janka — Hard.

Durability & Decay Resistance

Durable; heartwood has good natural resistance to decay and insects, while sapwood is less resistant. Not enough information to assess weathering condition.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$12 per board foot for clear, kiln-dried domestic white oak; figured or premium stock may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be determined from this clean, unfinished-looking surface; it appears relatively new or recently machined, with no reliable patina indicators.

Common Uses

Furniture, flooring, cabinetry, architectural millwork, veneer, barrels, and general construction.

Geographic Origin

Eastern and central North America, especially the eastern United States.

Workability

Generally machines and sands well, though its open grain can tear out around reversing cathedral figure; predrilling is advisable and tannins may react with iron.

Finish Recommendations

Use a clear oil, hardwax oil, lacquer, or polyurethane; sanding to 150–180 grit and a sealer/conditioning coat can help produce an even finish.

Notable Features

Visible open pores and pronounced plain-sawn cathedral figure are characteristic of oak; the sample lacks obvious medullary-ray fleck.

Learn more about Most likely White Oak; alternatives include European Oak or Ash. in the Wood Encyclopedia
Identified September 1, 2026