Likely quarter-sawn white oak; red oak is a possible alternative.
Quercus alba (likely); Quercus rubra is an alternative. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Likely eastern and central North America; white and red oak species are widespread in the eastern United States and southeastern Canada.
- Hardness
- White oak: about 1,360 lbf, Hard. Red oak: about 1,290 lbf, Hard.
- Durability
- White oak is Durable, with good decay and moisture resistance; red oak is less durable and only Slightly Durable. Species cannot be confirmed from this image alone.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, tight longitudinal grain with prominent ray flecking on the quarter-sawn faces; no clear decorative figure beyond the rays.
Color & Appearance
Light to medium golden-tan/brown with subtle variation. The image does not clearly show sapwood boundaries or finish; oak typically darkens slightly with age and light exposure.
Hardness (Janka)
White oak: about 1,360 lbf, Hard. Red oak: about 1,290 lbf, Hard.
Durability & Decay Resistance
White oak is Durable, with good decay and moisture resistance; red oak is less durable and only Slightly Durable. Species cannot be confirmed from this image alone.
Value & Age
Common kiln-dried oak lumber is roughly US$5–12 per board foot; grade, thickness, and local market affect price.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from this clean, apparently unfinished sample; no distinct patina or wear indicators are visible.
Common Uses
Furniture, flooring, cabinetry, millwork, barrels, and veneer.
Geographic Origin
Likely eastern and central North America; white and red oak species are widespread in the eastern United States and southeastern Canada.
Workability
Generally machines and finishes well, though interlocked grain can tear out during planing. Pre-drilling helps with fasteners; use sharp tools for clean results.
Finish Recommendations
Sand evenly and apply oil, shellac, lacquer, or polyurethane; test stain first, as oak’s open pores can absorb color unevenly.
Notable Features
The conspicuous ray fleck strongly suggests quarter-sawn oak; white oak has closed pores and is notably more moisture-resistant than red oak.
