Most likely Red Oak; alternatives include White Oak or ash.
Quercus rubra (probable); alternatives Quercus alba or Fraxinus spp. · Hardwood (temperate deciduous).
AI-generated identification · may be incorrect- Type
- Hardwood (temperate deciduous).
- Origin
- Eastern and central North America, especially the Appalachian, Great Lakes, and northeastern regions.
- Hardness
- Janka approximately 1,290 lbf—Hard.
- Durability
- Slightly Durable to Moderately Durable; reasonably resistant when dry but not naturally rot-resistant outdoors, with limited insect resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-grained, with subtle cathedral/flat-sawn figure and visible longitudinal pores; no distinctive decorative figure.
Color & Appearance
Pale pinkish-tan to light reddish-brown, with lighter sapwood and modest natural luster; typically darkens slightly amber-red with age and light.
Hardness (Janka)
Janka approximately 1,290 lbf—Hard.
Durability & Decay Resistance
Slightly Durable to Moderately Durable; reasonably resistant when dry but not naturally rot-resistant outdoors, with limited insect resistance.
Value & Age
Approximately $4–$8 per board foot for clear, kiln-dried retail stock; local pricing varies by grade and thickness.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly machined or lightly aged; no reliable patina or wear evidence permits a calendar-age estimate.
Common Uses
Furniture, flooring, cabinetry, trim, doors, veneer, interior millwork, and general joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian, Great Lakes, and northeastern regions.
Workability
Machines and sands well, though open pores and occasional grain reversal can cause tear-out; glues, screws, and finishes readily. Pre-drilling is advisable.
Finish Recommendations
Sand progressively to 180–220 grit, fill pores if a smooth surface is desired, then use oil, shellac, lacquer, or polyurethane; wiping stains may appear uneven without conditioner or sealer.
Notable Features
Open pores, prominent earlywood/latewood contrast, moderate weight, and characteristic oak ray structure, though rays are not obvious in this view.
