Likely white oak; European oak is a close alternative. — Quercus alba (likely); possibly Quercus robur or Q. petraea.

Likely white oak; European oak is a close alternative.

Quercus alba (likely); possibly Quercus robur or Q. petraea. · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
White oak is native to eastern North America; European oak alternatives grow across Europe and western Asia.
Hardness
1,360 lbf; Hard.
Durability
Durable heartwood; good decay resistance and moderate insect resistance, while sapwood is less resistant.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, fine-to-medium grain with long vertical lines; likely rift- or quarter-sawn veneer/face, with no obvious decorative figure.

Color & Appearance

Pale beige to light gray-brown, with subtle darker streaks. Fresh oak tends to warm and darken with light and oxidation; image shows little strong patina.

Hardness (Janka)

1,360 lbf; Hard.

Durability & Decay Resistance

Durable heartwood; good decay resistance and moderate insect resistance, while sapwood is less resistant.

Value & Age

Estimated Market ValueNot an official valuation

Roughly US$5–12 per board foot for ordinary kiln-dried white oak; grade, thickness, and region affect price. Veneer pricing differs.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from this clean, uniformly lit surface; no clear wear or aging indicators are visible.

Common Uses

Furniture, cabinetry, flooring, joinery, veneer, and barrels.

Geographic Origin

White oak is native to eastern North America; European oak alternatives grow across Europe and western Asia.

Workability

Generally machines and finishes well, though prominent grain can tear out; pre-drill near edges and use sharp tools. Glues well when surfaces are prepared.

Finish Recommendations

Sand evenly and use a compatible pore filler if a smooth finish is wanted; oil, lacquer, or polyurethane are common. Test stain first, as oak can color unevenly.

Notable Features

Oak’s prominent rays can show fleck on quarter-sawn faces; this image shows little visible ray fleck. Typically open-pored with a distinctive oak character.

Learn more about Likely white oak; European oak is a close alternative. in the Wood Encyclopedia
Identified September 26, 2026