Likely white oak; the stump’s bark and nearby lobed leaf suggest an oak, but species cannot be confirmed from this view. Alternatives include red oak.
Quercus alba (likely); possibly another Quercus species · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Likely eastern North America; white and red oaks are widespread across eastern and central regions.
- Hardness
- White oak: about 1,360 lbf, Hard; red oak: about 1,290 lbf, Hard.
- Durability
- White oak heartwood is Durable, with good decay resistance; red oak is generally Slightly Durable and less rot-resistant. Species and condition are uncertain.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
End grain and sawn face are not sufficiently visible to determine grain or cut; oak commonly has straight to irregular grain and prominent rays.
Color & Appearance
The exposed surface is pale tan to gray-brown, weathered and oxidized; fresh heartwood color and sapwood boundary are not discernible.
Hardness (Janka)
White oak: about 1,360 lbf, Hard; red oak: about 1,290 lbf, Hard.
Durability & Decay Resistance
White oak heartwood is Durable, with good decay resistance; red oak is generally Slightly Durable and less rot-resistant. Species and condition are uncertain.
Value & Age
Roughly $5–$12 per board foot for ordinary kiln-dried white oak; a stump cannot be valued without dimensions, condition, and processing.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot estimate tree age or time since felling reliably from the photograph; the bark and cut surface show outdoor weathering.
Common Uses
Furniture, flooring, cabinetry, veneer, barrels, and general construction; white oak is also used in boatbuilding.
Geographic Origin
Likely eastern North America; white and red oaks are widespread across eastern and central regions.
Workability
Generally machines and finishes well, though oak can splinter or tear out; predrilling is useful near edges, and white oak glues well.
Finish Recommendations
Sand to a consistent surface and use oil, lacquer, or polyurethane; test first because pores may need filling for a smooth finish.
Notable Features
Oak often has conspicuous medullary rays and open pores; these features are not clear enough here to verify species.