Most likely White Oak; alternatives include Red Oak or Ash.
Quercus alba (probable); alternatives Quercus rubra or Fraxinus spp. · Hardwood; temperate deciduous.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate deciduous.
- Origin
- Eastern and central North America, especially the United States and southern Canada.
- Hardness
- Approximately 1,360 lbf Janka; Hard.
- Durability
- Durable, especially White Oak heartwood; generally good rot and insect resistance, though sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium texture, with subtle cathedral and wavy variation consistent with flat-sawn lumber; no clear ray fleck is visible.
Color & Appearance
Pale cream to light tan with slightly darker gray-brown streaks; sapwood and heartwood are not clearly separated. Typically darkens modestly amber-brown with light exposure.
Hardness (Janka)
Approximately 1,360 lbf Janka; Hard.
Durability & Decay Resistance
Durable, especially White Oak heartwood; generally good rot and insect resistance, though sapwood is less resistant.
Value & Age
About $6–$12 per board foot for clear, kiln-dried White Oak; retail, figured, or wide stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, unfinished face; it shows little diagnostic patina or wear.
Common Uses
Furniture, flooring, cabinetry, doors, architectural millwork, barrels, veneer, and general joinery.
Geographic Origin
Eastern and central North America, especially the United States and southern Canada.
Workability
Machines and sands well, though interlocked areas can tear out; predrilling is advisable, and tannins may react with iron. Glues and finishes reliably.
Finish Recommendations
Sand carefully and apply a sealing coat followed by oil, lacquer, shellac, or polyurethane; water-based finishes preserve its pale color better than oil finishes.
Notable Features
Strong, open pores and prominent medullary rays are typical, although end grain is unavailable here; White Oak has good stiffness and attractive ray figure when quartersawn.
