Likely oak, most consistent with white oak; red oak is a plausible alternative. The cut end alone is not enough for a definitive species identification.
Quercus alba (probable); alternatively Quercus rubra or another Quercus species. · Hardwood (temperate broadleaf).
AI-generated identification · may be incorrect- Type
- Hardwood (temperate broadleaf).
- Origin
- Likely eastern North America; white and red oaks are widespread across the eastern United States and adjacent Canada.
- Hardness
- White oak: about 1,360 lbf, Hard; red oak: about 1,290 lbf, Hard.
- Durability
- White oak heartwood is Durable; red oak is slightly to non-durable. Sapwood is less decay-resistant in either case.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
End grain shows prominent annual rings and large pores; face grain is not clearly visible. The radial split and rough sawn surface obscure the cut orientation and any figure.
Color & Appearance
Weathered gray-brown heartwood with a pale sapwood band; exposed surfaces may darken or warm in color with oxidation and finishing.
Hardness (Janka)
White oak: about 1,360 lbf, Hard; red oak: about 1,290 lbf, Hard.
Durability & Decay Resistance
White oak heartwood is Durable; red oak is slightly to non-durable. Sapwood is less decay-resistant in either case.
Value & Age
Roughly US$5–12 per board foot for ordinary dry, usable oak; this rough, checked piece may be worth less, depending on dimensions and local market.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot estimate tree age or time since cutting reliably from this image; visible checking and weathering indicate exposure but not its duration.
Common Uses
Furniture, flooring, cabinetry, barrels, construction, veneer, and turning.
Geographic Origin
Likely eastern North America; white and red oaks are widespread across the eastern United States and adjacent Canada.
Workability
Generally machines and glues well; oak’s open pores and hardness can cause tearout, splitting, and tool wear. Predrill near edges for fasteners.
Finish Recommendations
Sand progressively and apply oil, lacquer, or polyurethane; pore filling gives a smoother finish. Test stain first, as oak can color unevenly.
Notable Features
Distinctive open pores and visible growth rings support oak; species-level clues such as ray fleck are not clear in this end-grain view.