
Likely White Oak; alternatives include Red Oak or European Oak
Quercus alba (likely) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the Appalachian and Midwest regions.
- Hardness
- 1,360 lbf Janka; Hard
- Durability
- Durable; heartwood has good decay resistance and moderate insect resistance, while sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-medium texture, with long cathedral-like bands suggesting flat-sawn/rift-to-flat-sawn stock; no distinctive figure visible.
Color & Appearance
Pale straw to light tan with slightly darker brown growth lines and minimal sapwood contrast; moderate luster, typically warming to honey-gold with age and light.
Hardness (Janka)
1,360 lbf Janka; Hard
Durability & Decay Resistance
Durable; heartwood has good decay resistance and moderate insect resistance, while sapwood is less resistant.
Value & Age
Approximately $6–$12 per board foot for clear, kiln-dried White Oak; premium quarter-sawn or figured stock costs more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from a clean, unfinished board; it appears relatively new, with no obvious patina or wear.
Common Uses
Furniture, flooring, cabinetry, millwork, veneer, barrels, interior trim, and general joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian and Midwest regions.
Workability
Machines and sands well, though interlocked grain can tear out during planing; predrilling is advisable, and tannins may react with iron fasteners.
Finish Recommendations
Apply a sanding sealer followed by oil, shellac, lacquer, or polyurethane; water-based finishes preserve the pale color, while oil ambers it.
Notable Features
Prominent latewood bands, attractive open pores, good dimensional stability, and characteristic oak ray fleck when quarter-sawn.