Likely oak, possibly a red oak or white oak; the bark-covered, weathered logs do not allow reliable species-level identification.
Quercus spp.; exact species uncertain · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- If North American oak, likely from eastern or central North America; source cannot be established visually.
- Hardness
- Oak varies by species: roughly 1,290–1,360 lbf for common red and white oaks; Hard.
- Durability
- Species-dependent: white oak is durable, while red oak is less decay-resistant. Logs shown are weathered; outdoor durability cannot be inferred from appearance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
The cut ends and bark obscure most grain. No distinctive figure or clear sawing pattern is visible.
Color & Appearance
Exposed ends appear pale tan to gray-brown; weathered bark and surfaces are dark gray-brown. Fresh heartwood and sapwood colors, luster, and aging shift cannot be determined.
Hardness (Janka)
Oak varies by species: roughly 1,290–1,360 lbf for common red and white oaks; Hard.
Durability & Decay Resistance
Species-dependent: white oak is durable, while red oak is less decay-resistant. Logs shown are weathered; outdoor durability cannot be inferred from appearance.
Value & Age
Roughly $3–$10 per board foot for ordinary kiln-dried lumber; log value depends heavily on species, grade, dimensions, and local market.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from the image; surface weathering does not reveal the tree’s age or time since felling.
Common Uses
Furniture, flooring, cabinetry, framing, barrels, veneer, and firewood.
Geographic Origin
If North American oak, likely from eastern or central North America; source cannot be established visually.
Workability
Generally machines and glues well, though oak can blunt tools and tear out around interlocked grain; predrilling is useful for fasteners.
Finish Recommendations
For confirmed, dry oak, sand progressively and use oil, lacquer, or polyurethane; test first because open pores may need filler for a smooth finish.
Notable Features
Oak commonly has prominent rays and open pores, but these are not clearly visible here; bark and rough end cuts dominate the image.