Most likely willow or poplar; willow is the leading possibility. Alternatives include cottonwood or basswood.
Salix spp.; alternatives Populus spp. or Tilia spp. · Hardwood (deciduous), very low density.
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous), very low density.
- Origin
- Willows and poplars occur widely across the Northern Hemisphere; commercial sources include North America, Europe, and Asia.
- Hardness
- Approximately 300–600 lbf Janka, Very Soft to Soft; exact value depends strongly on species.
- Durability
- Non-durable to Slightly Durable; generally vulnerable to decay, insects, and weathering when exposed.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and relatively diffuse-textured, with shallow longitudinal furrows and irregular growth-ring bands; no clear decorative figure.
Color & Appearance
Very pale cream to grayish white sapwood/wood, with subtle brown-gray ring bands and low luster. Freshly cut surfaces may yellow slightly with light and oxidation.
Hardness (Janka)
Approximately 300–600 lbf Janka, Very Soft to Soft; exact value depends strongly on species.
Durability & Decay Resistance
Non-durable to Slightly Durable; generally vulnerable to decay, insects, and weathering when exposed.
Value & Age
Roughly $2–$6 per board foot for ordinary domestic stock; specialty carving blanks may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly cut or recently worked; the exposed surface shows little oxidation or established patina. The growth rings cannot reliably date the sample.
Common Uses
Carving, crates, pallets, utility lumber, boxes, pulp, lightweight furniture, and occasionally turned objects.
Geographic Origin
Willows and poplars occur widely across the Northern Hemisphere; commercial sources include North America, Europe, and Asia.
Workability
Cuts, planes, sands, glues, and turns easily, though its softness can produce fuzzy surfaces, crushing, and tearout. Use sharp tools and light finishing passes.
Finish Recommendations
Sand progressively and seal with shellac, lacquer, oil, or water-/oil-based polyurethane. A sanding sealer helps prevent uneven absorption and fuzzing.
Notable Features
Very light, low-density wood with subdued grain and generally low dimensional stability; species identification from this image alone is difficult.