Most likely Red Oak; alternatives include White Oak or Ash
Quercus rubra (probable) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the northeastern United States and southeastern Canada.
- Hardness
- 1,290 lbf Janka — Hard
- Durability
- Slightly Durable; heartwood has limited decay resistance and is not especially weather-resistant. Insect resistance is likewise limited compared with naturally durable species.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse grain with visible open pores; appears flat-sawn or tangentially cut, with no distinctive figure visible.
Color & Appearance
Pale pinkish-tan to light reddish-brown, with lighter sapwood and modest color variation. Surface appears weathered or unfinished; oak typically darkens and warms slightly with age.
Hardness (Janka)
1,290 lbf Janka — Hard
Durability & Decay Resistance
Slightly Durable; heartwood has limited decay resistance and is not especially weather-resistant. Insect resistance is likewise limited compared with naturally durable species.
Value & Age
Approximately US$4–$9 per board foot for common kiln-dried Red Oak; figured, wide, or premium-grade stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined reliably from the image; visible abrasion and oxidation indicate use or exposure, not a measurable age.
Common Uses
Furniture, flooring, cabinetry, millwork, veneer, barrels, and general joinery.
Geographic Origin
Eastern and central North America, especially the northeastern United States and southeastern Canada.
Workability
Generally machines, sands, glues, and finishes well, though coarse pores and occasional grain reversal can cause tear-out. Predrilling is advisable for screws and nails.
Finish Recommendations
Sand evenly, fill pores if a smooth finish is desired, then use oil, shellac, lacquer, or polyurethane. Water-based finishes may emphasize grain contrast and raise the surface slightly.
Notable Features
Coarse open-pored texture and prominent earlywood/latewood contrast are consistent with oak. The image does not show enough end grain for definitive separation from Ash or White Oak.
