Likely reclaimed Douglas-fir; alternatives include western hemlock or another weathered softwood.
Pseudotsuga menziesii (likely) · Softwood; apparently reclaimed or previously used lumber.
AI-generated identification · may be incorrect- Type
- Softwood; apparently reclaimed or previously used lumber.
- Origin
- Native to western North America, especially the Pacific Northwest and interior western regions.
- Hardness
- About 620 lbf Janka; Soft classification.
- Durability
- Slightly durable: heartwood has limited decay resistance, while sapwood is vulnerable to rot and insects; not naturally weatherproof.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, coarse grain with prominent earlywood/latewood bands; flat-sawn face and rough, weathered surfaces. No distinctive decorative figure is visible.
Color & Appearance
Weathered gray-brown exterior with pale tan to pinkish-brown freshly exposed wood; low to moderate luster and likely warmer orange-brown coloration when newly finished.
Hardness (Janka)
About 620 lbf Janka; Soft classification.
Durability & Decay Resistance
Slightly durable: heartwood has limited decay resistance, while sapwood is vulnerable to rot and insects; not naturally weatherproof.
Value & Age
Approximately $1–$4 per board foot for ordinary reclaimed material; higher only if unusually old, wide, or well-preserved.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably dated visually; apparent reuse, abrasion, oxidation, and dirt suggest years to decades of exposure or service.
Common Uses
Framing, beams, boards, shelving, furniture components, crates, and general construction lumber.
Geographic Origin
Native to western North America, especially the Pacific Northwest and interior western regions.
Workability
Generally easy to saw, plane, sand, glue, and fasten, though resin, knots, and uneven reclaimed surfaces can cause tear-out or blade dulling.
Finish Recommendations
Remove dirt and loose fibers, then sand progressively; use shellac or sanding sealer before lacquer or polyurethane to control resin and uneven absorption. Penetrating oil gives a subdued reclaimed appearance.
Notable Features
Lightweight structural softwood with strong growth-ring contrast, characteristic resinous odor when freshly cut, and good strength-to-weight ratio.