Most likely White Oak; alternatives include Red Oak or ash.
Quercus alba (probable); Quercus rubra or Fraxinus spp. possible. · Hardwood; likely domestic temperate hardwood.
AI-generated identification · may be incorrect- Type
- Hardwood; likely domestic temperate hardwood.
- Origin
- Eastern and central North America, especially the Midwest, Appalachians, and eastern forests.
- Hardness
- White Oak: approximately 1,360 lbf, Hard; Red Oak: approximately 1,290 lbf, Hard.
- Durability
- White Oak is Durable, with good decay resistance; Red Oak is Moderately Durable to less resistant, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine to moderately coarse grain with subtle cathedral/flat-sawn movement; no obvious distinctive figure. End grain is not sufficiently visible for pore confirmation.
Color & Appearance
Pale tan to light beige with slightly darker heartwood and minimal sapwood contrast; low-to-moderate luster. It may amber modestly with age and light.
Hardness (Janka)
White Oak: approximately 1,360 lbf, Hard; Red Oak: approximately 1,290 lbf, Hard.
Durability & Decay Resistance
White Oak is Durable, with good decay resistance; Red Oak is Moderately Durable to less resistant, especially outdoors.
Value & Age
Approximately $5–$12 per board foot for clear, kiln-dried retail stock; grade and region substantially affect price.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or lightly weathered; no reliable evidence indicates an older reclaimed sample.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, and interior joinery.
Geographic Origin
Eastern and central North America, especially the Midwest, Appalachians, and eastern forests.
Workability
Machines and sands well, though oak can show tearout and blunting; predrilling is advisable. Gluing is generally reliable with properly prepared surfaces.
Finish Recommendations
Use sanding sealer followed by oil, shellac, lacquer, or polyurethane; water-based finishes preserve its pale tone, while oil ambers it.
Notable Features
Visible fine pores and restrained ray/figure evidence support oak, but the photograph does not resolve species-level anatomy confidently.
