Most likely eastern white pine; alternatives include western white pine or another light construction softwood.
Pinus strobus · Softwood (conifer)
AI-generated identification · may be incorrect- Type
- Softwood (conifer)
- Origin
- Native to northeastern North America and the Great Lakes/Appalachian regions; widely plantation-grown and commercially milled.
- Hardness
- Janka approximately 380 lbf — Very Soft.
- Durability
- Non-durable outdoors; heartwood has limited decay resistance, while sapwood is readily attacked by decay fungi and insects.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and even grain with subtle growth-ring lines; appears flat-sawn or rift-oriented, without notable figure.
Color & Appearance
Nearly white to very pale yellow with minimal heartwood contrast; darkens to warm yellow or amber with light exposure and oxidation, with low natural luster.
Hardness (Janka)
Janka approximately 380 lbf — Very Soft.
Durability & Decay Resistance
Non-durable outdoors; heartwood has limited decay resistance, while sapwood is readily attacked by decay fungi and insects.
Value & Age
About US$2–5 per board foot for clear, kiln-dried stock; select or wide boards may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or lightly handled; the photograph provides no reliable evidence of chronological age.
Common Uses
Interior trim, shelving, furniture, patternmaking, carving, cabinetry components, and general construction boards.
Geographic Origin
Native to northeastern North America and the Great Lakes/Appalachian regions; widely plantation-grown and commercially milled.
Workability
Very easy to saw, plane, sand, glue, and fasten, though its softness permits dents and can cause fuzzy surfaces or resin buildup on blades.
Finish Recommendations
Sand progressively to 180–220 grit; use shellac or a wash coat before stain to reduce blotching, then apply clear varnish, lacquer, polyurethane, or oil.
Notable Features
Lightweight, dimensionally stable, resinous, and typically knot-prone in common grades; the visible sample is unusually clear and fine-grained.
