Likely red oak veneer; the cabinetry may use a stained oak veneer or oak-look engineered panels.
Quercus rubra (likely; exact oak species cannot be confirmed from this image) · Hardwood veneer, likely on engineered cabinet panels
AI-generated identification · may be incorrect- Type
- Hardwood veneer, likely on engineered cabinet panels
- Origin
- Likely eastern North America, where red oak is widespread; oak veneers are also sourced from other regions.
- Hardness
- Red oak: about 1,290 lbf Janka — Hard; this rating describes solid wood, not the panel.
- Durability
- Moderately durable; heartwood has some decay resistance, while sapwood is less resistant. Not suitable for prolonged weather exposure without protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent, mostly straight cathedral and vertical grain, consistent with flat-sawn veneer; no distinctive figured pattern is visible.
Color & Appearance
Warm medium reddish-brown with darker grain lines; the panels appear fairly uniform, likely stained. Veneer and indoor lighting limit assessment of natural heartwood and sapwood.
Hardness (Janka)
Red oak: about 1,290 lbf Janka — Hard; this rating describes solid wood, not the panel.
Durability & Decay Resistance
Moderately durable; heartwood has some decay resistance, while sapwood is less resistant. Not suitable for prolonged weather exposure without protection.
Value & Age
Oak veneer varies widely; roughly US$3–8 per board foot equivalent for common veneer-grade stock, with cabinet panels priced by sheet and finish.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from the photo; the clean finish and lack of visible wear provide no useful age indicators.
Common Uses
Cabinetry, furniture, flooring, interior millwork, doors, and veneer.
Geographic Origin
Likely eastern North America, where red oak is widespread; oak veneers are also sourced from other regions.
Workability
Solid red oak machines and glues well but may tear out around grain reversals; open pores can require filling for a smooth finish. Veneer panels need careful edge and fastener treatment.
Finish Recommendations
For cabinetry, use a compatible stain or clear coat; seal evenly, and consider pore filler for a glass-smooth finish. Test on an inconspicuous area because veneer absorbs stain unevenly.
Notable Features
Open, coarse pores and strong grain figure are characteristic of oak; the image does not show end grain, so species-level confirmation is limited.