Uncertain; most likely weathered oak, with chestnut or another ring-porous hardwood as alternatives.
Quercus spp. (tentative; species cannot be determined from this view) · Hardwood; likely temperate broadleaf
AI-generated identification · may be incorrect- Type
- Hardwood; likely temperate broadleaf
- Origin
- If oak: native across much of the Northern Hemisphere; likely source region cannot be inferred from the photo.
- Hardness
- If oak: roughly 1,290–1,360 lbf, Hard; species-dependent.
- Durability
- If oak heartwood: Moderately Durable to Durable; sapwood is less resistant. The image cannot establish species or current condition beneath the surface.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Rough, weathered face with mostly straight grain and faint longitudinal bands; no clear decorative figure or cut orientation visible. End grain is not shown.
Color & Appearance
Gray to pale brown, heavily weathered and dirt-stained; original heartwood/sapwood colors and luster are obscured. Exposure has likely bleached and grayed the surface.
Hardness (Janka)
If oak: roughly 1,290–1,360 lbf, Hard; species-dependent.
Durability & Decay Resistance
If oak heartwood: Moderately Durable to Durable; sapwood is less resistant. The image cannot establish species or current condition beneath the surface.
Value & Age
Sound, kiln-dried common oak often retails around US$5–15 per board foot; this visibly weathered piece has no reliable grade-based estimate.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from appearance; weathering and insect-like holes do not indicate the wood’s age.
Common Uses
Oak is commonly used for furniture, flooring, cabinetry, framing, barrels, veneer, and turning.
Geographic Origin
If oak: native across much of the Northern Hemisphere; likely source region cannot be inferred from the photo.
Workability
Oak machines and finishes well but can splinter or tear out; predrilling is useful for fasteners. This rough, damaged surface may need substantial cleaning and preparation.
Finish Recommendations
Remove dirt and loose fibers, then test sanding on a small area; apply stain or oil, or a clear protective finish if the surface is sound. Weathered areas may absorb finish unevenly.
Notable Features
Small holes and dark spots may reflect insect damage or surface defects, but are not diagnostic. No scent, end-grain pores, or other decisive features are visible.
