Most likely pine, possibly ponderosa pine or lodgepole pine; exact species is uncertain because the sample is bark-covered and lacks a clean end-grain view.
Likely Pinus ponderosa or Pinus contorta; species-level identification is not reliable from this image. · Softwood (gymnosperm/conifer), apparently a natural branch or small log section.
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer), apparently a natural branch or small log section.
- Origin
- Pines occur widely across North America; ponderosa pine is common in western North America, while lodgepole pine ranges through western Canada and the United States.
- Hardness
- Approximately 350–620 lbf Janka, ranging from Very Soft to Soft depending on species and growth rate.
- Durability
- Slightly Durable; untreated pine generally has limited resistance to decay, insects, and prolonged weather exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Visible exposed wood appears coarse-textured with mostly straight grain, but bark and weathering obscure figure, growth-ring spacing, and cut orientation.
Color & Appearance
Exposed wood is orange-brown to reddish-brown with pale tan sapwood and heavy dark oxidation/weathering; fresh pine would generally be lighter and may amber with age.
Hardness (Janka)
Approximately 350–620 lbf Janka, ranging from Very Soft to Soft depending on species and growth rate.
Durability & Decay Resistance
Slightly Durable; untreated pine generally has limited resistance to decay, insects, and prolonged weather exposure.
Value & Age
Rough rustic material: typically about $1–$4 per board foot; clear, dry, usable pine may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated from the photograph; the dark surface indicates exposure and oxidation, not necessarily old wood.
Common Uses
Framing, boards, boxes, furniture, shelving, pulp, carving, and rustic décor; ponderosa pine is also used for interior millwork.
Geographic Origin
Pines occur widely across North America; ponderosa pine is common in western North America, while lodgepole pine ranges through western Canada and the United States.
Workability
Generally easy to cut, plane, sand, glue, and fasten, though knots, resin, bark inclusions, and uneven weathering can cause tear-out and dulling.
Finish Recommendations
Remove bark and loose fibers, dry thoroughly, and sand to sound wood; use penetrating oil, shellac, lacquer, or polyurethane, with knot-sealing before film finishes.
Notable Features
Thick plated bark and resinous-looking, strongly weathered heartwood are consistent with pine, but are not diagnostic.