Likely White Oak; alternatives include Red Oak or reclaimed oak flooring.
Quercus alba (most likely); Quercus rubra is a secondary possibility. · Hardwood; likely reclaimed or antique solid oak flooring.
AI-generated identification · may be incorrect- Type
- Hardwood; likely reclaimed or antique solid oak flooring.
- Origin
- Eastern and central North America, especially the eastern United States and southeastern Canada.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard. Red Oak is about 1,290 lbf.
- Durability
- White Oak is Durable, with good rot resistance relative to many domestic hardwoods; Red Oak is generally Moderately Durable and less weather-resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, rift- and quarter-sawn-looking grain with prominent open pores, fleck, and occasional cathedral pattern; plank orientation varies.
Color & Appearance
Medium tan to brown heartwood with lighter sapwood, darkened by oxidation, finish, and wear. Moderate luster; oak typically deepens slightly with age.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard. Red Oak is about 1,290 lbf.
Durability & Decay Resistance
White Oak is Durable, with good rot resistance relative to many domestic hardwoods; Red Oak is generally Moderately Durable and less weather-resistant.
Value & Age
Approximately $5–$12 per board foot for comparable new oak; reclaimed flooring commonly varies from $6–$15+ per square foot.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The wood itself cannot be dated visually; surface patina and wear suggest reused flooring, possibly several decades old.
Common Uses
Flooring, furniture, cabinetry, architectural paneling, barrels, veneer, and interior millwork.
Geographic Origin
Eastern and central North America, especially the eastern United States and southeastern Canada.
Workability
Machines and sands well, though open pores and reversing grain can cause tearout; predrilling is useful and tannins may react with iron fasteners.
Finish Recommendations
Clean and lightly sand, then use penetrating oil, hardwax oil, lacquer, or polyurethane; test first because aged wood absorbs unevenly.
Notable Features
Strong open-pore texture, visible medullary fleck, substantial wear resistance, and characteristic oak ray structure.
