Likely reclaimed oak; white oak or red oak cannot be distinguished reliably from this image.
Quercus spp. (likely Quercus alba or Quercus rubra) · Hardwood; apparently reclaimed
AI-generated identification · may be incorrect- Type
- Hardwood; apparently reclaimed
- Origin
- Likely eastern North America if domestic oak; both white and red oak groups grow broadly across the eastern United States and parts of Canada.
- Hardness
- White oak: about 1,360 lbf; red oak: about 1,290 lbf — Hard.
- Durability
- White oak is Durable; red oak is Slightly Durable. Species is uncertain, so rot and insect resistance cannot be assigned confidently.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Coarse, mostly straight grain on the rough-sawn end/face; the image does not clearly show a distinctive figure or establish the sawing orientation.
Color & Appearance
Weathered medium brown with darker streaks and surface grime; heartwood/sapwood contrast and original color are obscured. Luster is low; fresh exposure may appear lighter and darken with age.
Hardness (Janka)
White oak: about 1,360 lbf; red oak: about 1,290 lbf — Hard.
Durability & Decay Resistance
White oak is Durable; red oak is Slightly Durable. Species is uncertain, so rot and insect resistance cannot be assigned confidently.
Value & Age
Highly variable; rough reclaimed oak commonly sells for roughly US$5–20 per board foot, depending on species, dimensions, condition, and provenance.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not determinable from the photograph; weathering and rough surfaces suggest prior use, but do not establish age.
Common Uses
Furniture, flooring, cabinetry, construction, veneer, barrels, and interior trim; reclaimed stock is often reused for furniture or architectural details.
Geographic Origin
Likely eastern North America if domestic oak; both white and red oak groups grow broadly across the eastern United States and parts of Canada.
Workability
Machines and glues well, though coarse grain can tear out when planing; predrilling helps with fasteners. Reclaimed material may contain grit or hidden metal, so inspect before machining.
Finish Recommendations
Clean and sand progressively, then use oil, shellac, lacquer, or polyurethane; a test patch is advisable because weathering and old residues can affect color and adhesion.
Notable Features
Oak typically has prominent rays and open pores; the pictured end grain is too rough and blurred to confirm diagnostic pore or ray patterns.
