
Most likely American white oak; alternatives include ash or red oak.
Quercus alba (probable) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the eastern United States and southeastern Canada.
- Hardness
- 1,360 lbf Janka — Hard.
- Durability
- Durable; heartwood has good resistance to decay and weathering, while sapwood is less resistant. Moderate insect resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium texture with subtle cathedral-like flatsawn variation; no prominent figure visible.
Color & Appearance
Pale beige to light tan with slightly darker, indistinct heartwood; low-to-moderate luster. Typically warms modestly toward golden tan with age and light.
Hardness (Janka)
1,360 lbf Janka — Hard.
Durability & Decay Resistance
Durable; heartwood has good resistance to decay and weathering, while sapwood is less resistant. Moderate insect resistance.
Value & Age
Approximately $6–$12 per board foot for clear, kiln-dried retail lumber; local pricing varies by grade and thickness.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, unfinished surface; it appears relatively new or recently surfaced.
Common Uses
Furniture, flooring, cabinetry, millwork, barrels, veneer, interior construction, and boat components.
Geographic Origin
Eastern and central North America, especially the eastern United States and southeastern Canada.
Workability
Machines and glues well, though coarse grain can tear during planing and tannins may react with iron. Pre-drilling is advisable for screws and nails.
Finish Recommendations
Sand progressively, seal end grain, then use oil, hardwax oil, lacquer, or polyurethane. Water-based finishes preserve the pale color; oil adds warmth.
Notable Features
Visible pores and restrained grain are consistent with white oak; ray fleck would be more evident on quartersawn stock.