Likely highly figured pine, commonly called pine burl or “birdseye” pine; alternatives include pecky/cross-grained southern yellow pine or intentionally ebonized/torched pine.
Most likely Pinus spp.; exact species cannot be determined visually. · Softwood; possibly reclaimed or specially treated.
AI-generated identification · may be incorrect- Type
- Softwood; possibly reclaimed or specially treated.
- Origin
- Potentially North American pine, especially southeastern or eastern regions; origin is indeterminate from the image.
- Hardness
- Approximately 690–870 lbf, species-dependent; Soft to lower Medium.
- Durability
- Slightly Durable; untreated pine is vulnerable to decay, insects, and weathering, while heartwood offers somewhat better resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Extreme swirling, concentric knot figure and locally interlocked grain, with prominent dark streaking around knots; flat-sawn or irregularly sawn.
Color & Appearance
Golden tan to honey-colored background with very dark brown/black bands, likely from natural resin, oxidation, scorching, or staining. Strong contrast and moderate luster.
Hardness (Janka)
Approximately 690–870 lbf, species-dependent; Soft to lower Medium.
Durability & Decay Resistance
Slightly Durable; untreated pine is vulnerable to decay, insects, and weathering, while heartwood offers somewhat better resistance.
Value & Age
About $10–$40 per board foot for striking figured pine; exceptional burl panels may exceed this.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable; darkening appears more related to figure or treatment than age, with no clear patina or wear evidence.
Common Uses
Decorative panels, furniture accents, cabinetry, boxes, wall cladding, turning, and veneer; not representative of ordinary structural pine.
Geographic Origin
Potentially North American pine, especially southeastern or eastern regions; origin is indeterminate from the image.
Workability
Generally easy to cut, sand, glue, and fasten, but knots and reversing grain can cause tear-out and irregular tool resistance.
Finish Recommendations
Seal knots with shellac or a suitable knot sealer, then use clear lacquer, shellac, or satin polyurethane; test first because dark bands may bleed or absorb unevenly.
Notable Features
Exceptional knot/burl-like figure, resinous character, and dramatic chatoyant contrast; dark areas may indicate burning, staining, or mineral/resin inclusions.