Medium Density Fiberboard (MDF) with Birch Veneer
Betula spp. (for veneer layer) · Engineered
AI-generated identification · may be incorrect- Type
- Engineered
- Origin
- Globally produced; wood fibers usually sourced from North American or European temperate forests.
- Hardness
- N/A for composite; Surface is Medium (approx. 1,260 lbf Janka for Birch layer).
- Durability
- Non-durable; susceptible to rot, insect attack, and severe swelling/disintegration if exposed to moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Veneer layer shows a rotary-cut or flat-sawn cathedral grain with subtle wavy figure; the core is composition-based (non-directional fiber).
Color & Appearance
Veneer is a pale yellowish-white to light reddish-brown (typical of Birch); core is a uniform dull tan/brown. It lacks significant luster and typically yellows with age.
Hardness (Janka)
N/A for composite; Surface is Medium (approx. 1,260 lbf Janka for Birch layer).
Durability & Decay Resistance
Non-durable; susceptible to rot, insect attack, and severe swelling/disintegration if exposed to moisture.
Value & Age
$1.50 - $4.00 per board foot (valued as sheet goods/plywood).
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Modern; likely less than 10 years old based on the clean factory cut and lack of oxidation on the MDF fiber.
Common Uses
Low-cost furniture, cabinetry, shelving, speaker enclosures, and craft projects.
Geographic Origin
Globally produced; wood fibers usually sourced from North American or European temperate forests.
Workability
Excellent with machines; easy to cut and route but very dulling to blades due to glue content. Poor screw-holding on edges; needs pre-drilling.
Finish Recommendations
Priming is essential for edges; takes paint very well. Veneer can be finished with lacquer, polyurethane, or shellac.
Notable Features
Heavy and dense; produces fine, irritating dust when cut; prone to edge splitting; no distinctive scent unless adhesives are off-gassing.
