Likely rift- or quarter-sawn red oak veneer; alternatives include white oak or ash.
Quercus rubra (probable); Quercus alba or Fraxinus spp. possible. · Hardwood; likely veneered furniture panel rather than solid lumber.
AI-generated identification · may be incorrect- Type
- Hardwood; likely veneered furniture panel rather than solid lumber.
- Origin
- Eastern and central North America; red oak is especially common in the northeastern, Appalachian, and Great Lakes regions.
- Hardness
- Red oak: approximately 1,290 lbf Janka—Hard. White oak is about 1,360 lbf; ash about 1,320 lbf.
- Durability
- Red oak: Moderately durable; heartwood has limited-to-moderate rot and insect resistance, while sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Very straight, narrow vertical grain with fine cathedraling; appearance suggests rift/quarter-sawn veneer. No prominent figure visible.
Color & Appearance
Warm pinkish-tan to reddish brown, with darker lower-area shading likely from lighting or age; moderate natural luster and likely gradual ambering with light.
Hardness (Janka)
Red oak: approximately 1,290 lbf Janka—Hard. White oak is about 1,360 lbf; ash about 1,320 lbf.
Durability & Decay Resistance
Red oak: Moderately durable; heartwood has limited-to-moderate rot and insect resistance, while sapwood is less resistant.
Value & Age
Approximately $3–$8 per board foot for ordinary kiln-dried red-oak lumber; decorative veneer panels vary widely.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably determinable from this photograph; the surface appears relatively clean and may be modern, with no clear patina or wear evidence.
Common Uses
Furniture, cabinetry, architectural paneling, doors, flooring, trim, and veneer.
Geographic Origin
Eastern and central North America; red oak is especially common in the northeastern, Appalachian, and Great Lakes regions.
Workability
Generally machines, sands, glues, and finishes well, though oak can show tear-out across grain and may require predrilling for fasteners.
Finish Recommendations
Light sanding followed by stain, dye, lacquer, shellac, or polyurethane; use a sanding sealer or conditioner to improve uniformity.
Notable Features
Distinctive oak ray fleck is absent or minimized by the cut; the fine, uniform grain is consistent with selected veneer.
