Likely red oak flooring; white oak is a plausible alternative.
Quercus rubra (likely); alternatively Quercus alba or related oak. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Red oak is native to eastern and central North America; white oak also grows across eastern North America.
- Hardness
- 1290 lbf (red oak), Hard; white oak is about 1360 lbf, also Hard.
- Durability
- Moderately Durable for red oak heartwood; less decay-resistant outdoors than white oak. Indoor flooring is typical; sapwood is more vulnerable to insects and decay.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, prominent longitudinal grain with visible pores and occasional cathedral figure, suggesting flat-sawn boards. No clear end grain is visible to confirm species or cut.
Color & Appearance
Warm honey to medium brown, with darker grain and wear marks; oak may deepen and amber with age and light. Sapwood-heartwood distinction is not apparent.
Hardness (Janka)
1290 lbf (red oak), Hard; white oak is about 1360 lbf, also Hard.
Durability & Decay Resistance
Moderately Durable for red oak heartwood; less decay-resistant outdoors than white oak. Indoor flooring is typical; sapwood is more vulnerable to insects and decay.
Value & Age
Approximately $4–10 per board foot for ordinary kiln-dried lumber; installed or reclaimed flooring prices vary substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably date from the photograph; surface wear and patina indicate use, not a specific age.
Common Uses
Flooring, furniture, cabinetry, millwork, veneer, and interior trim.
Geographic Origin
Red oak is native to eastern and central North America; white oak also grows across eastern North America.
Workability
Machines and finishes well, though open pores need filling for a smooth finish; oak can split near edges, so predrilling fasteners is useful.
Finish Recommendations
Sand evenly and apply oil, hardwax oil, polyurethane, or lacquer; pore filler gives a smoother surface. Test stain on an inconspicuous area.
Notable Features
Visible open pores and strong grain are consistent with oak; the image shows no diagnostic end grain or distinctive figure.
