Likely reclaimed oak; red oak is a tentative best guess. Chestnut or another open-grained hardwood are alternatives.
Quercus spp.; species cannot be determined from this image. · Hardwood; apparently reclaimed or weathered.
AI-generated identification · may be incorrect- Type
- Hardwood; apparently reclaimed or weathered.
- Origin
- If oak, likely from a temperate Northern Hemisphere species; the image cannot identify its growing region.
- Hardness
- Oak ranges roughly 1,290–1,360 lbf (Hard), depending on species.
- Durability
- Moderately durable to durable heartwood; weathering and age cannot establish the wood’s original decay or insect resistance.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Coarse, mostly straight grain with dark streaks and irregular wear; the face does not clearly reveal a distinctive sawn figure.
Color & Appearance
Weathered medium reddish-brown with darker streaks and possible grime or old finish. Heartwood/sapwood and original color are obscured; fresh-cut wood would be needed to assess them.
Hardness (Janka)
Oak ranges roughly 1,290–1,360 lbf (Hard), depending on species.
Durability & Decay Resistance
Moderately durable to durable heartwood; weathering and age cannot establish the wood’s original decay or insect resistance.
Value & Age
Typical oak lumber varies widely, approximately US$4–12 per board foot; reclaimed, figured, or graded stock may differ substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from the photograph. Surface wear suggests prior use, but gives no dependable calendar age.
Common Uses
Oak is commonly used for furniture, flooring, cabinetry, structural timber, barrels, and veneer; this piece may be reclaimed from furniture or a fixture.
Geographic Origin
If oak, likely from a temperate Northern Hemisphere species; the image cannot identify its growing region.
Workability
Oak machines and finishes well but its open pores may need filling for a smooth finish; predrilling helps with fasteners. Existing holes, wear, and possible old coating complicate assessment.
Finish Recommendations
Clean and test a small area, then sand carefully; oil, shellac, lacquer, or polyurethane are common options. Oak’s pores can be filled before a smooth topcoat.
Notable Features
The coarse, darkly streaked surface is consistent with aged oak, but dirt, finish, and lighting may alter its appearance.
