Likely Red Oak; alternatives include White Oak or oak veneer over engineered substrate.
Quercus rubra (most likely); Quercus alba is a plausible alternative. · Hardwood; likely solid or sliced oak veneer, with construction not verifiable from the photograph.
AI-generated identification · may be incorrect- Type
- Hardwood; likely solid or sliced oak veneer, with construction not verifiable from the photograph.
- Origin
- Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
- Hardness
- Janka approximately 1,290 lbf—Hard.
- Durability
- Slightly to moderately durable; reasonable interior decay resistance but not preferred for persistent exterior exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-pored grain with prominent cathedral/flat-sawn figure and occasional irregular streaking; no distinctive figured pattern is visible.
Color & Appearance
Warm honey to reddish-brown heartwood with relatively subtle sapwood contrast and a glossy finish. Red oak commonly deepens and warms with age and light.
Hardness (Janka)
Janka approximately 1,290 lbf—Hard.
Durability & Decay Resistance
Slightly to moderately durable; reasonable interior decay resistance but not preferred for persistent exterior exposure.
Value & Age
Approximately $5–$12 per board foot for typical clear red-oak lumber; finished architectural panels may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The wood appears finish-coated and moderately aged, but its actual age cannot be reliably estimated from this image; likely decades rather than centuries.
Common Uses
Flooring, furniture, cabinetry, paneling, doors, architectural millwork, veneer, and general interior construction.
Geographic Origin
Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
Workability
Generally machines, sands, glues, and finishes well, though open pores and occasional tear-out require sharp cutters. Pre-drilling is useful for screws and nails.
Finish Recommendations
Use filler or a grain-enhancing finish for a smoother surface, followed by oil, shellac, lacquer, or polyurethane; test stain because oak can color unevenly.
Notable Features
Distinctive open pores, strong cathedral grain, moderate weight, and prominent ray fleck potential when quarter-sawn.