Most likely White Oak; alternatives include Red Oak or European Oak.
Quercus alba (likely); Quercus rubra or Quercus robur are alternatives. · Hardwood.
AI-generated identification · may be incorrect- Type
- Hardwood.
- Origin
- Eastern and central North America, especially the Appalachian and Midwestern regions.
- Hardness
- 1,360 lbf Janka; Hard.
- Durability
- Durable; good natural resistance to decay and insects, though exposed end grain requires protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-grained, and plainsawn/possibly riftsawn; subtle cathedral figure and visible pores, with no distinctive decorative figure.
Color & Appearance
Pale cream to light tan heartwood with slightly darker brown streaking and narrow lighter sapwood; moderate luster. It typically ambers mildly with age and light.
Hardness (Janka)
1,360 lbf Janka; Hard.
Durability & Decay Resistance
Durable; good natural resistance to decay and insects, though exposed end grain requires protection.
Value & Age
Approximately $6–$12 per board foot for clear, kiln-dried White Oak; premium figured or wide stock costs more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The clean, unfinished appearance provides no reliable age estimate; it appears relatively new or recently milled.
Common Uses
Furniture, flooring, cabinetry, trim, barrels, interior joinery, veneer, and general construction.
Geographic Origin
Eastern and central North America, especially the Appalachian and Midwestern regions.
Workability
Machines and sands well, but open pores and occasional grain reversal can cause tear-out. Pre-drilling is advisable; it glues and finishes reliably.
Finish Recommendations
Sand evenly and apply a pore-filling or clear sealer followed by oil, lacquer, shellac, or polyurethane; water-based finishes preserve its pale color.
Notable Features
Prominent pores, strong dimensional stability, and characteristic ray fleck when quarter-sawn; the image shows little medullary-ray figure.
