Most likely a softwood such as pine; species cannot be reliably identified from this weathered face alone. Alternatives include spruce or fir.
Pinus spp. (tentative); Picea spp. or Abies spp. are alternatives. · Softwood (conifer).
AI-generated identification · may be incorrect- Type
- Softwood (conifer).
- Origin
- Indeterminate from appearance; pine, spruce, and fir occur across many regions, including North America and Europe.
- Hardness
- Species-dependent: pine commonly ranges about 380–870 lbf; broadly Soft to Medium.
- Durability
- Likely non-durable to slightly durable unless a naturally durable pine; exposed surface shows weathering, but rot and insect resistance cannot be judged from the image.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, subdued grain with long longitudinal marks; no clear decorative figure or reliable sawing pattern is visible.
Color & Appearance
Weathered tan to medium brown surface with a paler edge; original heartwood/sapwood colors and luster are obscured by age and dirt.
Hardness (Janka)
Species-dependent: pine commonly ranges about 380–870 lbf; broadly Soft to Medium.
Durability & Decay Resistance
Likely non-durable to slightly durable unless a naturally durable pine; exposed surface shows weathering, but rot and insect resistance cannot be judged from the image.
Value & Age
Ordinary pine lumber is often roughly US$2–6 per board foot retail, varying substantially by region, grade, and condition.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not estimable from the photograph; surface weathering indicates exposure or wear, not a dependable age.
Common Uses
Depending on species and grade: framing, cabinetry, furniture, trim, and general woodworking.
Geographic Origin
Indeterminate from appearance; pine, spruce, and fir occur across many regions, including North America and Europe.
Workability
Typical softwoods cut and sand readily, though resin, knots, and compression marks can complicate finishing; predrilling may help near edges.
Finish Recommendations
Clean and sand to sound wood, then use a compatible sealer and paint or clear finish; test first because weathered surfaces absorb unevenly.
Notable Features
No diagnostic scent, resin, end-grain pores, or growth-ring details are visible.