Likely birch plywood; the visible face veneer may be birch, though maple or another pale hardwood is possible.
Betula spp. (likely; species cannot be determined from this image) · Engineered (likely hardwood-veneered plywood)
AI-generated identification · may be incorrect- Type
- Engineered (likely hardwood-veneered plywood)
- Origin
- Birches are native across temperate and boreal regions of the Northern Hemisphere; commercial plywood commonly comes from North America, Europe, or Asia.
- Hardness
- Birch: about 1,260 lbf (Hard); this rating may not represent the plywood panel.
- Durability
- Birch heartwood is slightly durable to non-durable outdoors; plywood durability depends on veneer, adhesive, and grade.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine, subdued grain with slight variation; appears flat-sawn. No prominent figure is visible.
Color & Appearance
Pale tan to light golden-brown face with subtle darker grain; the narrow edge appears darker. Finish and lighting obscure natural color and luster.
Hardness (Janka)
Birch: about 1,260 lbf (Hard); this rating may not represent the plywood panel.
Durability & Decay Resistance
Birch heartwood is slightly durable to non-durable outdoors; plywood durability depends on veneer, adhesive, and grade.
Value & Age
Generic birch plywood varies widely by thickness and grade; roughly $2–$8 per square foot retail, not meaningfully priced per board foot.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably estimable from the image; the surface appears finished and in serviceable condition, with no clear aging indicators.
Common Uses
Cabinetry, furniture, shelving, drawer bottoms, and interior panels.
Geographic Origin
Birches are native across temperate and boreal regions of the Northern Hemisphere; commercial plywood commonly comes from North America, Europe, or Asia.
Workability
Cuts and sands readily with sharp tools; plywood can splinter at edges, so use fine-tooth blades and seal exposed plies.
Finish Recommendations
Light sanding followed by clear water-based finish, lacquer, or polyurethane; test first, as veneer is thin and may sand through.
Notable Features
The image shows a smooth, uniform panel face and a small metal fastener; end grain is not visible, limiting species identification.
