Likely plain-sawn oak, possibly red oak; white oak is an alternative. The image does not show end grain, so species-level identification is uncertain.
Quercus rubra (likely); alternatively Quercus alba · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Both are native to eastern North America; red oak is especially common in the eastern United States and southeastern Canada.
- Hardness
- Red oak: about 1,290 lbf, Hard; white oak: about 1,360 lbf, Hard.
- Durability
- Red oak heartwood is slightly durable and prone to decay when exposed outdoors; white oak is durable and more decay-resistant. The image cannot distinguish them.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-medium grain with subtle vertical streaks; the broad face appears flat-sawn. No distinctive figure is visible.
Color & Appearance
Muted tan to light brown with slight grain variation; finish and lighting may affect the apparent color. Oak commonly darkens somewhat with age and light exposure.
Hardness (Janka)
Red oak: about 1,290 lbf, Hard; white oak: about 1,360 lbf, Hard.
Durability & Decay Resistance
Red oak heartwood is slightly durable and prone to decay when exposed outdoors; white oak is durable and more decay-resistant. The image cannot distinguish them.
Value & Age
Typical kiln-dried, surfaced domestic oak lumber: roughly US$5–12 per board foot retail, varying by region, grade, and supplier.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably from this image; no clear patina, wear, or other age indicators are visible.
Common Uses
Furniture, cabinetry, flooring, veneer, interior trim, and general woodworking; white oak is also used for barrels and exterior applications.
Geographic Origin
Both are native to eastern North America; red oak is especially common in the eastern United States and southeastern Canada.
Workability
Generally machines and glues well; coarse grain can splinter or show sanding marks. Pre-drilling is useful near edges.
Finish Recommendations
Sand evenly and apply oil, lacquer, shellac, or polyurethane; use a grain filler for a smoother finish if desired.
Notable Features
Oak has prominent pores and can show ray fleck when quarter-sawn; those diagnostic details are not clearly visible here.