Likely Douglas-fir; possible western redcedar or redwood — Pseudotsuga menziesii (most likely)

Likely Douglas-fir; possible western redcedar or redwood

Pseudotsuga menziesii (most likely) · Softwood (conifer)

AI-generated identification · may be incorrect
Type
Softwood (conifer)
Origin
Native to western North America, especially the Pacific Northwest and interior western regions.
Hardness
620 lbf Janka; Soft
Durability
Slightly Durable; heartwood has limited decay resistance and is not highly weather-resistant without protection.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, fine-to-medium texture, with narrow vertical latewood bands; appears flat-sawn or edge-grain. No distinctive figure visible.

Color & Appearance

Warm orange-brown to reddish heartwood with lighter streaks; likely darkened by finish and age. Douglas-fir typically gains amber-orange color with light exposure.

Hardness (Janka)

620 lbf Janka; Soft

Durability & Decay Resistance

Slightly Durable; heartwood has limited decay resistance and is not highly weather-resistant without protection.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $3–$8 per board foot for clear surfaced Douglas-fir; architectural reclaimed trim may vary widely.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Indeterminate from the photograph; the painted/finished trim appears used, but visible wear does not establish tree or lumber age.

Common Uses

Framing, trim, doors, siding, shelving, cabinetry, flooring, and general construction lumber.

Geographic Origin

Native to western North America, especially the Pacific Northwest and interior western regions.

Workability

Machines and sands well, though resin, uneven grain, and latewood can cause fuzzy surfaces or occasional tearout. Glues, nails, and screws readily.

Finish Recommendations

Remove old finish, sand progressively, and apply shellac, lacquer, oil, or polyurethane; use a conditioner or sealer for more uniform color.

Notable Features

Distinctive warm color, resinous scent when freshly cut, strong fiber, and prominent earlywood/latewood contrast.

Learn more about Likely Douglas-fir; possible western redcedar or redwood in the Wood Encyclopedia
Identified September 10, 2026