Likely white oak veneer; ash or European oak are alternatives. Identification from this finished surface is uncertain.

Quercus alba (if white oak) · Hardwood

Type: Hardwood
Origin: White oak is native to eastern and central North America.
Hardness: White oak: about 1,360 lbf — Hard.
Durability: White oak is Durable, with good decay resistance and comparatively good resistance to moisture; exact rating depends on species and treatment.

Identify any wood from a photo, free.

Fine, mostly straight grain with visible elongated pores; likely flat-sawn veneer. No distinctive figure is evident.

Pale gray-beige surface, probably altered by stain or finish; heartwood/sapwood and natural luster cannot be reliably judged from the image.

White oak: about 1,360 lbf — Hard.

White oak is Durable, with good decay resistance and comparatively good resistance to moisture; exact rating depends on species and treatment.

Value & Age

Estimated Market ValueNot an official valuation

Roughly $5–$12 per board foot for common white oak lumber; veneer or finished furniture pricing differs substantially.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate: Not estimable from this image; the smooth, finished surface shows no clear age indicators.

Furniture, cabinetry, flooring, millwork, veneer, and barrels.

White oak is native to eastern and central North America.

Generally machines and finishes well, though prominent pores may need filling for a smooth finish; predrill for fasteners near edges.

Light sanding followed by clear waterborne finish, oil, or lacquer; test first because stain and finish can shift the pale gray tone.

Oak’s open, prominent pores and ray fleck on quarter-sawn surfaces are characteristic; no ray figure is apparent here.

Identified October 9, 2026