Most likely poplar/aspen; alternatives include basswood or low-grade maple.
Likely Populus spp. (possibly Populus tremuloides); exact species cannot be confirmed from this image. · Hardwood (angiosperm/deciduous), likely domestic temperate wood.
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm/deciduous), likely domestic temperate wood.
- Origin
- Northern and eastern North America for aspen/poplar; commonly grown and milled across the United States and Canada.
- Hardness
- Approximately 350–430 lbf Janka: Very Soft.
- Durability
- Non-durable outdoors; limited resistance to rot, insects, and weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine, and diffuse-textured, with subtle wavy bands and occasional irregular cathedral figure; appears flat-sawn. No distinctive decorative figure is visible.
Color & Appearance
Very pale cream to grayish-white with weak contrast between heartwood and sapwood; low luster and mild darkening/yellowing with age and light.
Hardness (Janka)
Approximately 350–430 lbf Janka: Very Soft.
Durability & Decay Resistance
Non-durable outdoors; limited resistance to rot, insects, and weathering.
Value & Age
About $1–$3 per board foot for ordinary rough stock; premium clear material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears relatively new or only lightly weathered; visible staining and edge damage do not establish chronological age.
Common Uses
Interior trim, crates, pallets, drawer parts, painted furniture, paneling, veneer, and pulp.
Geographic Origin
Northern and eastern North America for aspen/poplar; commonly grown and milled across the United States and Canada.
Workability
Cuts, planes, sands, glues, and nails easily, though its softness can cause fuzzy surfaces, dents, and blotchy stain absorption.
Finish Recommendations
Use sanding sealer or conditioner before stain; paint, shellac, lacquer, or water-based polyurethane are suitable. Clear finishes emphasize its pale appearance.
Notable Features
Lightweight, low-density, mild-scented wood with subdued grain and good paint-holding potential.