Likely maple, but the image is insufficient for reliable species identification; birch or another pale, close-grained wood could look similar.
Acer spp. (tentative; species cannot be determined visually here) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Maples are native to the Northern Hemisphere; many commercial species grow in eastern North America.
- Hardness
- Maple ranges roughly 700–1,450 lbf depending on species: soft maple is Soft to Medium; hard maple is Hard.
- Durability
- Generally Slightly Durable to Non-durable without protection; susceptible to decay and insect attack when exposed to moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Pale, mostly straight and fine-grained appearance; no distinctive figure or end grain is visible. Cut orientation is unclear.
Color & Appearance
Uniform light cream to pale gray-beige with subtle grain and low visible luster; lighting and finish may alter the apparent color.
Hardness (Janka)
Maple ranges roughly 700–1,450 lbf depending on species: soft maple is Soft to Medium; hard maple is Hard.
Durability & Decay Resistance
Generally Slightly Durable to Non-durable without protection; susceptible to decay and insect attack when exposed to moisture.
Value & Age
Common maple lumber is often about US$4–10 per board foot, varying substantially by species, grade, region, and thickness.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated from this image; no clear patina, wear, or exposed end grain is shown.
Common Uses
Furniture, cabinetry, flooring, turning, carving, and musical instruments, depending on species and grade.
Geographic Origin
Maples are native to the Northern Hemisphere; many commercial species grow in eastern North America.
Workability
Usually machines and finishes well; hard maple can be demanding to cut and may burn, while figured grain can tear out. Predrill near edges for fasteners.
Finish Recommendations
Sand evenly and apply clear oil, lacquer, shellac, or polyurethane; test first, as pale maple may finish unevenly or show blotching.
Notable Features
Typically fine-textured and even-colored; hard maple is dense and can show curly or bird’s-eye figure, neither apparent here.