Likely Bloodwood; alternatives include Padauk or Redheart
Brosimum rubescens (likely) · Hardwood; exotic/tropical
AI-generated identification · may be incorrect- Type
- Hardwood; exotic/tropical
- Origin
- Tropical South America, especially Brazil and neighboring Amazonian regions.
- Hardness
- Approximately 2,900 lbf Janka; Extremely Hard
- Durability
- Very Durable; generally highly resistant to decay and insects, though long-term outdoor performance depends on exposure and construction.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine and uniform grain with a smooth, closed texture; appears to be a narrow, possibly quarter- or rift-sawn piece. No conspicuous figure.
Color & Appearance
Deep crimson to reddish-purple heartwood with darker linear streaks and good natural luster. Bloodwood commonly darkens toward brownish red with light exposure and oxidation.
Hardness (Janka)
Approximately 2,900 lbf Janka; Extremely Hard
Durability & Decay Resistance
Very Durable; generally highly resistant to decay and insects, though long-term outdoor performance depends on exposure and construction.
Value & Age
Approximately US$15–35 per board foot for clear retail stock; small specialty pieces may command more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The piece appears newly machined or lightly handled; visible appearance cannot establish tree age or reliable sample age.
Common Uses
High-end furniture, turning blanks, cabinetry accents, flooring, knife scales, small specialty parts, and decorative inlay.
Geographic Origin
Tropical South America, especially Brazil and neighboring Amazonian regions.
Workability
Very dense and abrasive: machines cleanly with sharp carbide tools but can dull blades; predrilling is advised. Sands and finishes well, while gluing requires clean, freshly prepared surfaces.
Finish Recommendations
Apply a clear wiping oil, shellac, lacquer, or polyurethane after fine sanding; use a seal coat if uneven absorption occurs. Avoid overly dark finishes that obscure the red color.
Notable Features
Striking naturally red color, high density, fine texture, and excellent polish; minimal visible pore contrast in this sample.