Likely spruce (possibly another construction softwood such as fir); species cannot be reliably distinguished from this image.
Likely Picea spp.; alternatives include Abies spp. or Pinus spp. · Softwood (conifer), apparently rough-sawn construction lumber.
AI-generated identification · may be incorrect- Type
- Softwood (conifer), apparently rough-sawn construction lumber.
- Origin
- Spruces are native across northern temperate regions; common construction species grow in North America and Europe.
- Hardness
- Spruce is roughly 380 lbf Janka—Very Soft; values vary by species and test source.
- Durability
- Generally Non-durable to Slightly Durable when untreated; limited resistance to decay and insects, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight grain with visible growth-ring bands; the coarse, torn-looking end grain is consistent with a rough crosscut, not a distinctive decorative figure.
Color & Appearance
Pale cream to light tan, with subtle growth-ring contrast; surface appears weathered or dusty, so original color and luster are uncertain.
Hardness (Janka)
Spruce is roughly 380 lbf Janka—Very Soft; values vary by species and test source.
Durability & Decay Resistance
Generally Non-durable to Slightly Durable when untreated; limited resistance to decay and insects, especially outdoors.
Value & Age
Rough construction-grade spruce commonly sells for about $2–$6 per board foot in North America, varying by region and dimensions.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not estimable from the photo; no clear patina or wear evidence establishes the wood’s age.
Common Uses
Framing, sheathing, general construction, crates, pulp, and some musical instruments.
Geographic Origin
Spruces are native across northern temperate regions; common construction species grow in North America and Europe.
Workability
Light and easy to cut and fasten, but soft fibers can crush or splinter; sharp blades and pilot holes near edges help.
Finish Recommendations
Sand progressively and use a compatible sealer or primer before paint; clear finishes can highlight uneven absorption, so test first.
Notable Features
Low density and generally straight grain; the image does not show enough detail to confirm species-specific scent or properties.