Likely soft maple (possibly red maple); birch is a reasonable alternative. The visible face is too rough and limited for a firm species identification.
Acer rubrum (tentative); possibly Betula spp. · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- If maple, likely eastern North America; red maple ranges widely across eastern Canada and the United States.
- Hardness
- Red maple: about 950 lbf, Medium; birch alternatives vary, commonly around 1,260 lbf for yellow birch, Hard.
- Durability
- Slightly Durable; maple is generally susceptible to decay and insect attack when exposed to damp conditions.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine and diffuse-looking grain; rough-sawn face obscures detail. No clear decorative figure or reliable sawing pattern is visible.
Color & Appearance
Pale cream to light tan with subtle gray-brown marks and uneven discoloration. Maple can mellow toward golden tan with age; the photo does not show clear heartwood or sapwood boundaries.
Hardness (Janka)
Red maple: about 950 lbf, Medium; birch alternatives vary, commonly around 1,260 lbf for yellow birch, Hard.
Durability & Decay Resistance
Slightly Durable; maple is generally susceptible to decay and insect attack when exposed to damp conditions.
Value & Age
Typical rough maple lumber is roughly US$3–8 per board foot, varying substantially by region, grade, and moisture.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot estimate from the image; surface dirt and rough marks do not reliably indicate age.
Common Uses
Furniture, cabinetry, flooring, turned objects, and interior millwork.
Geographic Origin
If maple, likely eastern North America; red maple ranges widely across eastern Canada and the United States.
Workability
Generally machines and sands well, though maple can burn during machining and show tearout around irregular grain. Pre-drilling is useful near edges.
Finish Recommendations
Sand progressively and apply a clear oil, lacquer, or polyurethane; test stain first, since maple may stain unevenly.
Notable Features
The sample appears unfinished and rough-sawn; no distinctive scent, end-grain pores, or characteristic figure can be assessed.