Likely red oak; alternatives include white oak or ash.
Quercus rubra (probable); Quercus alba or Fraxinus spp. possible. · Hardwood; domestic North American species.
AI-generated identification · may be incorrect- Type
- Hardwood; domestic North American species.
- Origin
- Eastern and central North America, especially the Great Lakes, Appalachians, and northeastern United States.
- Hardness
- Janka approximately 1,290 lbf—Hard.
- Durability
- Slightly durable to moderately durable; heartwood has limited decay resistance and is generally unsuitable for prolonged exterior exposure without protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-medium texture, likely plainsawn or riftsawn; no notable decorative figure visible. End grain is not shown, limiting confirmation.
Color & Appearance
Pale pinkish-tan to light reddish-brown with subtle sapwood/heartwood variation and moderate luster; it generally darkens slightly and warms with age and light.
Hardness (Janka)
Janka approximately 1,290 lbf—Hard.
Durability & Decay Resistance
Slightly durable to moderately durable; heartwood has limited decay resistance and is generally unsuitable for prolonged exterior exposure without protection.
Value & Age
Approximately US$4–9 per board foot for clear, kiln-dried retail lumber; grade and region can change this substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or relatively new; the image shows little oxidation, patina, or wear. Exact age cannot be determined from appearance alone.
Common Uses
Furniture, flooring, cabinetry, millwork, veneer, interior trim, and general joinery.
Geographic Origin
Eastern and central North America, especially the Great Lakes, Appalachians, and northeastern United States.
Workability
Machines and sands well, though open pores and occasional grain reversal can cause tear-out. It glues, screws, and finishes reliably; predrilling is advisable.
Finish Recommendations
Use sanding sealer followed by oil, lacquer, shellac, or polyurethane; pore filling gives a smoother finish. Water-based finishes may initially emphasize grain contrast.
Notable Features
Visible elongated pores and warm pink-tan color are consistent with oak, but the photograph lacks diagnostic end grain and ray detail.
