Most likely white oak; alternatives include ash or red oak.
Quercus alba (likely) · Hardwood; temperate North American species.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate North American species.
- Origin
- Eastern and central North America, especially the Appalachian, Midwest, and southeastern regions.
- Hardness
- 1,360 lbf Janka — Hard.
- Durability
- Durable: heartwood has good resistance to decay and moderate insect resistance, while sapwood is less durable.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium grain with subtle vertical cathedraling; appears plain-sawn or rift/quarter-oriented. No obvious decorative figure is visible.
Color & Appearance
Pale gray-beige to light tan with restrained variation and low-to-moderate luster; white oak commonly warms slightly golden with age and light exposure.
Hardness (Janka)
1,360 lbf Janka — Hard.
Durability & Decay Resistance
Durable: heartwood has good resistance to decay and moderate insect resistance, while sapwood is less durable.
Value & Age
Approximately US$5–12 per board foot for clear, kiln-dried white oak; premium figured or wide stock costs more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from this image; the surface appears relatively clean and recently finished or lightly weathered.
Common Uses
Flooring, furniture, cabinetry, millwork, barrels, veneer, doors, and general construction.
Geographic Origin
Eastern and central North America, especially the Appalachian, Midwest, and southeastern regions.
Workability
Generally machines, sands, glues, and finishes well, though interlocked grain can tear out and tannins may react with iron fasteners.
Finish Recommendations
Use a sanding sealer followed by oil, lacquer, shellac, or polyurethane; water-based finishes preserve the pale tone, while oil enriches it.
Notable Features
Distinctive ray fleck may appear on quarter-sawn surfaces; typically heavy, stiff, and open-pored with visible growth-ring contrast.
