Most likely reclaimed Eastern White Pine; alternatives include Southern Yellow Pine or Douglas-fir.
Pinus strobus (likely); alternatives Pinus spp. or Pseudotsuga menziesii · Softwood; reclaimed/weathered lumber
AI-generated identification · may be incorrect- Type
- Softwood; reclaimed/weathered lumber
- Origin
- Eastern and central North America, especially the northeastern United States and southeastern Canada.
- Hardness
- About 380 lbf Janka, Very Soft; species alternatives may range roughly 620–870 lbf.
- Durability
- Slightly Durable; untreated pine generally has limited resistance to rot, insects, and prolonged weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, coarse grain with prominent longitudinal growth lines; flat-sawn boards show knots and slight irregularity, with no distinctive decorative figure.
Color & Appearance
Weathered gray-brown surface with remaining pale tan/yellow heartwood and lighter sapwood; oxidation and abrasion have muted the original color and reduced luster.
Hardness (Janka)
About 380 lbf Janka, Very Soft; species alternatives may range roughly 620–870 lbf.
Durability & Decay Resistance
Slightly Durable; untreated pine generally has limited resistance to rot, insects, and prolonged weathering.
Value & Age
Approximately $2–6 per board foot for ordinary reclaimed pine; higher only with documented provenance or exceptional patina.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The visible gray patina, embedded grime, worn surface, and old fastener holes suggest roughly 20–70 years of exposure or service, though the board itself may be older.
Common Uses
Historic framing, sheathing, crates, shelving, furniture, rustic paneling, and reclaimed decorative work.
Geographic Origin
Eastern and central North America, especially the northeastern United States and southeastern Canada.
Workability
Easy to saw, plane, sand, drill, nail, screw, and glue; soft fibers dent readily, and knots or embedded grit can cause tear-out and dull blades.
Finish Recommendations
Remove grime, lightly sand, and test for contaminants before applying finish; use shellac, oil, lacquer, or polyurethane, with stain conditioner if coloring.
Notable Features
Lightweight, resinous softwood with visible knots and weathering; the dark circular marks appear to be old knot/fastener areas rather than diagnostic features.
